FP-22-CP 10/2 Popet Valve
FP-22-CP-10-2-POPET-VALF
The poppet valve is used to control the passage of a fluid with the help of the spring and coil inside. Suitable for working under heavy conditions.
CONTACT US
[ GENERAL INFORMATION ]
A flow divider is a hydraulic valve that divides the flow into two or more parts. This allows a single pump to power multiple circuits simultaneously. There are two versions of proportional flow divider, gear or rotary and spool type.
BRAND · OLEOWEB
DRF Line Type Flow Divider
MODEL · DRF-HAT-TIPI-AKIS-BOLUCU↳ +90 538 983 1290↳ ENGINEERING SUPPORT · 3 HOURS
[ MODELS ]
Technical Specifications
4 MODELS
| Model | Measurement | Pressure (bar) | Flow (lt/dk) |
|---|---|---|---|
| DRF 10 (2-5) | 3/8"-1/2" | 250 | 2-5 |
| DRF 10 (3-10) | 3/8"-1/2" | 250 | 3-10 |
| DRF 10 (7-20) | 3/8"-1/2" | 250 | 7-20 |
| DRF 10 (15-40) | 3/8"-1/2" | 250 | 15-40 |
[ SIMILAR PRODUCTS ]
From the same category
FPSQR Pressure Sequencing Pipe Type
FPSQR-BASINC-SIRALAMA-BORU-TIP
Pressure sequence valves are a hydraulic They are located on the main flow line in the system and when they reach the set pressure value, they open or close the next hydraulic system. Pipe type connection.
[ TECHNICAL SUPPORT ]In product selection
In product selection
not sure?
Our engineers are here to help you choose the right product. Share your specs — we'll get back with hydraulic calculation, circuit diagram and BOM report in 24 hours.
- AVG. RESPONSE TIME ·
- 3 HOURS
- ENGINEERING TEAM ·
- 12 PERSON
- SERVICE HOURS ·
- MON–FRI · 08:30–18:00
[ CONTACT ]
Quote for DRF-HAT-TIPI-AKIS-BOLUCU
Share quantity, lead time and technical questions; our team responds in detail within 3 hours.