FP-22-CP 10/2 Popet Valve
FP-22-CP-10-2-POPET-VALF
The poppet valve is used to control the passage of a fluid with the help of the spring and coil inside. Suitable for working under heavy conditions.
[ GENERAL INFORMATION ]
These are safety armatures produced to prevent the fluid passing through it from returning back. Check valves meet certain criteria due to the purpose of use and the needs of the system, and many types meet these criteria. It is known as tilting weighted, tilting piston, wafer, swing, dual, spring, disco types.
BRAND · OLEOWEB
VUR Line Type Check Valve
MODEL · VUR-HAT-TIPI-CEKVALF↳ +90 538 983 1290↳ ENGINEERING SUPPORT · 3 HOURS
[ MODELS ]
Technical Specifications
8 MODELS
| Model | Measurement | Pressure (bar) | Centre | Flow (lt/dk) |
|---|---|---|---|---|
| VUR 180 | 1/8" | 400 | 0,5 Bar Açma Ba. | 10 |
| VUR 140 | 1/4" | 400 | 0,5 Bar Açma Ba. | 15 |
| VUR 380 | 3/8" | 400 | 0,5 Bar Açma Ba. | 30 |
| VUR 120 | 1/2" | 400 | 0,5 Bar Açma Ba. | 50 |
| VUR 340 | 3/4" | 400 | 0,5 Bar Açma Ba. | 80 |
| VUR 100 | 1" | 350 | 0,5 Bar Açma Ba. | 150 |
| VUR 114 | 1"1/4 | 350 | 0,5 Bar Açma Ba. | 200 |
| VUR 112 | 1"1/2 | 350 | 0,5 Bar Açma Ba. | 300 |
[ SIMILAR PRODUCTS ]
From the same category
FPSQR Pressure Sequencing Pipe Type
FPSQR-BASINC-SIRALAMA-BORU-TIP
Pressure sequence valves are a hydraulic They are located on the main flow line in the system and when they reach the set pressure value, they open or close the next hydraulic system. Pipe type connection.
[ TECHNICAL SUPPORT ]In product selection
In product selection
not sure?
Our engineers are here to help you choose the right product. Share your specs — we'll get back with hydraulic calculation, circuit diagram and BOM report in 24 hours.
- AVG. RESPONSE TIME ·
- 3 HOURS
- ENGINEERING TEAM ·
- 12 PERSON
- SERVICE HOURS ·
- MON–FRI · 08:30–18:00
[ CONTACT ]
Quote for VUR-HAT-TIPI-CEKVALF
Share quantity, lead time and technical questions; our team responds in detail within 3 hours.